AMETEK Ls Series Driver Manual - Manual (Page 143)

IVI Driver Manual Lx / Ls Series
139
3FFC0103 Instrument does not have Self-Test capability.
3FFC0104 Instrument does not have Error Query capability.
3FFC0105 Instrument does not have Revision Query capability.
ERRORS:
BFFC0001 Parameter 1 out of range, or error trying to set it.
BFFC0002 Parameter 2 out of range, or error trying to set it.
BFFC0003 Parameter 3 out of range, or error trying to set it.
BFFC0004 Parameter 4 out of range, or error trying to set it.
BFFC0005 Parameter 5 out of range, or error trying to set it.
BFFC0006 Parameter 6 out of range, or error trying to set it.
BFFC0007 Parameter 7 out of range, or error trying to set it.
BFFC0008 Parameter 8 out of range, or error trying to set it.
BFFC0011 Instrument failed the ID Query.
BFFC0012 Invalid response from instrument.
errorMessage
Variable Type ViChar[]
Returns the user-readable message string that corresponds to the
status code you specify.
You must pass a ViChar array with at least 256 bytes.
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetError function. To clear the
error information from the driver, call the ciLxs_ClearError
function.
The general meaning of the status code is as follows:
Value Meaning
-------------------------------
0 Success
Positive Values Warnings
Negative Values Errors
This driver defines the following status codes:
Status Description
-------------------------------------------------
ERRORS:
BFFA1001 The trigger source is not software trigger.
This instrument driver also returns errors and warnings defined by
other sources. The following table defines the ranges of additional