AMETEK Ls Series Driver Manual - Manual (Page 121)

IVI Driver Manual Lx / Ls Series
117
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetError function. To clear the
error information from the driver, call the ciLxs_ClearError
function.
The general meaning of the status code is as follows:
Value Meaning
-------------------------------
0 Success
Positive Values Warnings
Negative Values Errors
This driver defines the following status codes:
Status Description
-------------------------------------------------
ERRORS:
BFFA1001 The trigger source is not software trigger.
This instrument driver also returns errors and warnings defined by
other sources. The following table defines the ranges of additional
status codes that this driver can return. The table lists the
different include files that contain the defined constants for the
particular status codes:
Numeric Range (in Hex) Status Code Types
-------------------------------------------------
3FFA0000 to 3FFA1FFF IVI Warnings
3FFF0000 to 3FFFFFFF VISA Warnings
3FFC0000 to 3FFCFFFF VXIPnP Driver Warnings
BFFA0000 to BFFA1FFF IVI Errors
BFFF0000 to BFFFFFFF VISA Errors
BFFC0000 to BFFCFFFF VXIPnP Driver Errors
________________________________________________________________________________