AMETEK Ls Series Driver Manual - Manual (Page 243)

IVI Driver Manual Lx / Ls Series
239
attributeValue
Variable Type ViBoolean
Pass the value to which you want to set the attribute.
From the function panel window, you can use this control as follows.
- If the attribute currently showing in the Attribute ID ring
control has constants as valid values, you can view a list of
the constants by pressing on this control. Select a
value by double-clicking on it or by selecting it and then
pressing .
Note: Some of the values might not be valid depending on the
current settings of the instrument session.
Default Value: none
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetError function. To clear the
error information from the driver, call the ciLxs_ClearError
function.
The general meaning of the status code is as follows:
Value Meaning
-------------------------------
0 Success
Positive Values Warnings
Negative Values Errors
This driver defines the following status codes:
Status Description
-------------------------------------------------
ERRORS:
BFFA1001 The trigger source is not software trigger.
This instrument driver also returns errors and warnings defined by
other sources. The following table defines the ranges of additional
status codes that this driver can return. The table lists the
different include files that contain the defined constants for the
particular status codes:
Numeric Range (in Hex) Status Code Types
-------------------------------------------------
3FFA0000 to 3FFA1FFF IVI Warnings