AMETEK Ls Series Driver Manual User Manual
Page 269
IVI Driver Manual
Lx / Ls Series
265
WARNINGS:
none
ERRORS:
none
This instrument driver also returns errors and warnings defined by
other sources. The following table defines the ranges of additional
status codes that this driver can return. The table lists the
different include files that contain the defined constants for the
particular status codes:
Numeric Range (in Hex) Status Code Types
-------------------------------------------------
3FFA2000 to 3FFA3FFF IviDCPwr Warnings
3FFA0000 to 3FFA1FFF IVI Warnings
3FFF0000 to 3FFFFFFF VISA Warnings
3FFC0000 to 3FFCFFFF VXIPnP Driver Warnings
BFFA2000 to BFFA3FFF IviDCPwr Errors
BFFA0000 to BFFA1FFF IVI Errors
BFFF0000 to BFFFFFFF VISA Errors
BFFC0000 to BFFCFFFF VXIPnP Driver Errors
________________________________________________________________________________
Attribute Information for the Following Functions:
ciLxs_SetAttributeViInt32
ciLxs_GetAttributeViInt32
ciLxs_CheckAttributeViInt32
ciLxs_SetAttributeViReal64
ciLxs_GetAttributeViReal64
ciLxs_CheckAttributeViReal64
ciLxs_SetAttributeViSession
ciLxs_GetAttributeViSession
ciLxs_CheckAttributeViSession
ciLxs_SetAttributeViBoolean
ciLxs_GetAttributeViBoolean
ciLxs_CheckAttributeViBoolean
ciLxs_SetAttributeViString
ciLxs_GetAttributeViString
ciLxs_CheckAttributeViString
CILXS_ATTR_OUTPUT_PHASE_COUNT CILXS_ATTR_OUTPUT_PHASE_COUNT
CILXS_ATTR_OUTPUT_ENABLED CILXS_ATTR_OUTPUT_ENABLED
CILXS_ATTR_OUTPUT_ALC_STATE CILXS_ATTR_OUTPUT_ALC_STATE
CILXS_ATTR_OUTPUT_PHASE_MODE CILXS_ATTR_OUTPUT_PHASE_MODE
CILXS_ATTR_SLEW_FREQUENCY_RATE CILXS_ATTR_SLEW_FREQUENCY_RATE
CILXS_ATTR_FUNCTION CILXS_ATTR_FUNCTION
CILXS_ATTR_FREQUENCY CILXS_ATTR_FREQUENCY
CILXS_ATTR_INSTR_USER_TABLE_LIST
CILXS_ATTR_INSTR_USER_TABLE_LIST
CILXS_ATTR_CLIPPING_LEVEL CILXS_ATTR_CLIPPING_LEVEL
CILXS_ATTR_MAX_NUM_WAVEFORMS CILXS_ATTR_MAX_NUM_WAVEFORMS
CILXS_ATTR_WAVEFORM_QUANTUM CILXS_ATTR_WAVEFORM_QUANTUM