AMETEK Ls Series Driver Manual - Manual (Page 39)

IVI Driver Manual Lx / Ls Series
35
ciLxs_ClearInterchangeWarnings
ViStatus ciLxs_ClearInterchangeWarnings (ViSession instrumentHandle);
Purpose
This function clears the list of current interchange warnings.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetErrorInfo function. To clear
the error information from the driver, call the ciLxs_ClearErrorInfo
function.
The general meaning of the status code is as follows:
Value Meaning
-------------------------------
0 Success
Positive Values Warnings
Negative Values Errors
This driver defines the following status codes:
Status Description
-------------------------------------------------
WARNINGS:
none
ERRORS:
none
This instrument driver also returns errors and warnings defined by
other sources. The following table defines the ranges of additional
status codes that this driver can return. The table lists the
different include files that contain the defined constants for the