AMETEK Ls Series Driver Manual - Manual (Page 70)

IVI Driver Manual Lx / Ls Series
66
ciLxs_ConfigurePulse
ViStatus ciLxs_ConfigurePulse (ViSession instrumentHandle,
ViInt32 count, ViReal64 width,
ViReal64 period);
Purpose
This function configures the generation of output pulses.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
count
Variable Type ViInt32
Pass the number of pulses that are output when a triggered output
transient occurs. The driver sets the CILXS_ATTR_TRIGGER_PULSE_COUNT
attribute to this value.
Valid Range: 1 to 2147483647
Default Value: 1
width
Variable Type ViReal64
Pass the the width of a transient output pulse. The driver sets the
CILXS_ATTR_TRIGGER_PULSE_WIDTH attribute to this value.
Units: Seconds
Valid Range:
3-phase models: 0 to 1.07533e6
1-phase models: 0 to 4.30133e5
Default Value: 0.01667
period
Variable Type ViReal64
Pass the period of a triggered output transient. The driver sets the