AMETEK Ls Series Driver Manual - Manual (Page 64)

IVI Driver Manual Lx / Ls Series
60
ciLxs_ConfigureOVP
ViStatus ciLxs_ConfigureOVP (ViSession instrumentHandle,
ViChar _VI_FAR phase[], ViBoolean enabled,
ViReal64 limit);
Purpose
This function configures the power supply's over-voltage protection. You
specify the over-voltage limit and the behavior of the power supply when
the output voltage is greater than or equal to that value.
When the enabled parameter is VI_FALSE, the limit parameter does not
affect the instrument's behavior, and the driver ignores the limit
parameter.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
phase
Variable Type ViChar[]
Pass the virtual phase name that you assign to the instrument in the
Configuration Utility.
Virtual phase names are aliases for instrument-specific phase
strings. The instrument-specific phase strings can differ from one
instrument to another. Virtual phase names allow you to use and swap
instruments without having to change the phase names in your source
code. You assign a virtual phase name to an instrument-specific
phase through the Configuration Utility. This control accepts
virtual phase names you have assigned to the specific instrument you
are using. It also accepts the instrument-specific phase names.
Default Value: ""
Notes:
(1) You can specify the phase name as a string variable or as a
literal enclosed in double quotes.
enabled
Variable Type ViBoolean