AMETEK Ls Series Driver Manual - Manual (Page 43)

IVI Driver Manual Lx / Ls Series
39
ciLxs_ConfigureAcqTriggerSource
ViStatus ciLxs_ConfigureAcqTriggerSource (ViSession instrumentHandle,
ViInt32 source);
Purpose
This function configures the trigger source for a triggered measurement
sequence.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
source
Variable Type ViInt32
Pass the trigger source for a triggered measurement sequence. The
driver sets the CILXS_ATTR_ACQUISITION_TRIGGER_SOURCE attribute to
this value.
Defined Values:
CILXS_VAL_SOFTWARE_TRIG - The power supply waits until you call the
ciLxs_SendSoftwareTrigger function.
CILXS_VAL_TRIG_EXTERNAL - The power supply waits for a trigger on the
external trigger input.
CILXS_VAL_TRIG_TTLT - The power supply waits for a signal driving the
Trigger Out BNC
Default Value: CILXS_VAL_SOFTWARE_TRIG
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the