AMETEK Ls Series Driver Manual - Manual (Page 106)

IVI Driver Manual Lx / Ls Series
102
ciLxs_ConfigureTriggerFrequencyList
ViStatus ciLxs_ConfigureTriggerFrequencyList (ViSession instrumentHandle,
ViInt32 listSize,
ViReal64 _VI_FAR
frequency[]);
Purpose
This function configures the sequence of frequency list points.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
listSize
Variable Type ViInt32
The number of list points.
frequency
Variable Type ViReal64[]
The sequence of frequency list points used to configure the AC
Source.
The frequency points are given in the command parameters, which are
separated by commas.
Unit: hertz
Valid Range:
45.0 to 5000.0
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetError function. To clear the
error information from the driver, call the ciLxs_ClearError