AMETEK Ls Series Driver Manual - Manual (Page 58)

IVI Driver Manual Lx / Ls Series
54
ciLxs_ConfigureOutputEnabled
ViStatus ciLxs_ConfigureOutputEnabled (ViSession instrumentHandle,
ViBoolean enabled);
Purpose
This function enables or disables the AC source output. The state of a
disabled output is an output voltage amplitude set to 0 volts, with
output relays opened.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
enabled
Variable Type ViBoolean
Pass whether you want the signal the power supply produces on a
output. The driver uses this value to set the
CILXS_ATTR_OUTPUT_ENABLED attribute.
Valid Values:
VI_TRUE (1) - Enable the output
VI_FALSE (0) - Disable the output
Default Value: VI_TRUE
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetError function. To clear the
error information from the driver, call the ciLxs_ClearError
function.
The general meaning of the status code is as follows:
Value Meaning
-------------------------------
0 Success
Positive Values Warnings