Altera Quartus II Settings File - Manual (Page 728)

ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION
Allows the Fitter to automatically insert buffer logic cells between two nodes without altering the
functionality of the design. Buffer logic cells are created from unused logic cells in the device. This option
also allows the Fitter to duplicate a logic cell within a LAB when there are unused logic cells available in a
LAB. Using this option can increase compilation time. The default setting of Auto will allow these
operations to run when 1) the design requires them to fit the design or 2) the performance of the design
can be improved by this optimization with a nominal compilation time increase.
Type
Enumeration
Values
• Auto
• Off
• On
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION
Default Value
Auto
728 ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback