Altera Quartus II Settings File - Manual (Page 607)

INCREASE_OUTPUT_ENABLE_CLOCK_ENABLE_DELAY
Increases the propagation delay from the interior of the device to the clock enable input of an output
enable register. This is an advanced option that should be used only after you compile a project, check the
I/O timing, and determine that the timing is unsatisfactory. This option is ignored if it is applied to
anything other than an I/O cell that has an output enable register with a clock enable signal. For detailed
information on how to use this option, refer to the data sheet for the device family, which is available from
the Literature section of the Altera web site.
Old Name
INCREASE_OUTPUT_ENABLE_CLOCK_ENABLE_DELAYR
Type
Enumeration
Values
• Large
• Off
• On
• Small
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment supports Fitter wildcards.
Syntax
set_instance_assignment -name INCREASE_OUTPUT_ENABLE_CLOCK_ENABLE_DELAY -to
-entity
MNL-Q21005
2015.05.04
INCREASE_OUTPUT_ENABLE_CLOCK_ENABLE_DELAY 607
Quartus Settings File Reference Manual Altera Corporation
Send Feedback