Altera Quartus II Settings File - Manual (Page 724)

RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION
Specifies how the Data[15..8], PADD[23..0], NRESET, NAVD, NOE and NWE pins should be used when
the device is operating in user mode after configuration is complete. Depending on the current device and
configuration scheme, these pins can be reserved as regular I/O pins, as inputs that are tri-stated, as
outputs that drive ground, as outputs that drive an unspecified signal, or compiler configured. If these
pins are reserved as regular I/O pins, they can be used as ordinary I/O pins after configuration. If these
pins are only used to interface with external memory for configuration, these pins should be reserved as
compiler configured.
Old Name
RESERVE_OTHER_APF_PINS_AFTER_CONFIGURATION
Type
Enumeration
Values
• As input tri-stated
• As output driving an unspecified signal
• As output driving ground
• Compiler configured
• Use as regular IO
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION
Default Value
Use as regular IO
Example
set_global_assignment -name RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION "USE
AS REGULAR IO"
724 RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback