Altera Stratix II EP2S180 DSP Development Board - Manual (Page 48)

2–40 Core Version a.b.c variable Altera Corporation
Stratix II EP2S180 DSP Development Board Reference Manual
Expansion Interfaces
Audio CODEC (U5)
The board contains three stereo jack connectors, which serve as one stereo
input, one amplified stereo output, and one non-amplified stereo output.
The stereo jacks are driven by a Stereo Audio CODEC running at
8-96 KHz.
Table 2–33 shows the pin-outs for the CODEC.
Table 2–34 describes the device used to implement the CODEC.
Expansion
Interfaces The Stratix II EP2S180 DSP development board includes the following
interfaces:
■ A TI-EVM/FPDP connector (J31, J33), located on the reverse side of
the board
■ An RS-232C Serial I/O interface (J29)
Table 2–33. Audio CODEC (U5) Pin-Outs
Signal Stratix II Pin
audio_BCLK AG4
audio_CS_n AH1
audio_SDIN AH2
audio_SCLK AH3
audio_MODE AH4
audio_DOUT AJ1
audio_DIN AJ2
audio_LRCIN AG2
audio_LRCOUT AG3
audio_CLK AL18
Table 2–34. Audio CODEC Device Reference
Item Description
Board reference U5
Part number TLV320AIC23PW
Device description Stereo Audio CODEC, 8-96 KHz
Voltage 3.3 V
Manufacturer Texas Instruments
Manufacturer web site www.ti.com