Pilz PSS SB FT, Basic license - Manual (Page 25)

4-1 Modular Block System: Burner Management
Intended Use
Application
The software package “MBS Burner Management” is designed for
use within the failsafe section of the PSS-range of programmable safety
systems. With this MBS package it is possible to control and monitor
various status conditions on furnaces.
INFORMATION
• Use of standard function blocks outside the specifications described here
will be deemed as improper use.
• MBS blocks must be run through as part of each cycle.
Please refer also to the table showing the required connections for the
standard function blocks, at the end of Chapter 6.
INFORMATION
Always use the current version of the standard function block.
Please ensure you refer to the Appendix, sections entitled “Standard
function blocks: current versions” and “Changes to the standard function
blocks”.
System software
The software package “MBS Burner Management” can be used with the
PSS WIN-PRO system software.
Further information is available in the PSS WIN-PRO “Progamming Manu-
al”.