Pilz PSS SB FT, Basic license - Manual (Page 14)

1-4
Introduction
Modular Block System: Burner Management
Overview of manual
1 Introduction
The chapter you are reading provides an introduction to the Modular
Block System (MBS). It is designed to familiarise you with the
contents, structure and specific order of this manual and also contains
terminology definitions.
2 Overview
This chapter provides information on the most important features of
the software package and provides a brief overview of the application
range.
3 Safety
This chapter must be read as it contains important information on
safety regulations.
4 Intended Use
This chapter must be read as it contains information on intended use.
5 MBS Basics
This chapter explains the basic functions and safety requirements of
the MBS.
6 Standard Function Blocks
This chapter explains the function of the package’s standard function
blocks.
7 Link Blocks
This chapter is designed to help you link the standard function blocks
into your project and to commission the safety functions.
8 Examples
This chapter is designed to give an overview of how the standard
function blocks may be applied and contains typical application
examples.
9 Appendix
The Appendix contains a table that explains the relationship between
categories and requirement classes, plus a list that documents the
current version status of the standard function blocks.