EXFO FLS-2600B Tunable Laser Source - Manual (Page 94)

Remote Control
86 FLS-2600B
General Commands
*OPC?
Description This query puts an ASCII “1” in the output queue when the
content of the input queue has been processed. This query is
useful to prevent another command from processing until the
current command is complete.
Syntax *OPC?
Response “1”
*REM
Description This command is used to set the Remote programming state.
Syntax *REM
Parameters The parameter can be “1” to set the Remote
programming state to Remote or “0” to set the Remote
progamming state to Local.
Note This command can only be used with RS-232 communication.