beautypg.com

Starting a sweep – EXFO FLS-2600B Tunable Laser Source User Manual

Page 51

background image

Operating your Tunable Laser Source

Tunable Laser Source

43

Starting a Sweep

Starting a Sweep

After setting your sweep parameters as explained in Setting Sweep
Parameters
on page 29 and t
hat your source is turned on, you are ready to
start your sweep.

To start the sweep, press the Start button on the front panel. The system
will perform the sweep according to the settings you have entered.

To stop the sweep before it is completed, press the Stop button on the
front panel.

Note: You can stop the sweep at any time. Turning the laser on or off will also

stop the sweep.