EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 573)

Referencia de instrucciones SCPI
OSA 567
Product-Specific Commands—Description
:SENSe[1..n]:CORRection:OFFSet
[:MAGNitude]
Description This command sets the power offset that is
added to every point measured by the
instrument.
At *RST, this value is set to 0.0 dB.
Syntax :SENSe[1..n]:CORRection:OFFSet[:MAGNitude]
DB|W/W|PCT]>|MAXi
mum|MINimum|DEFault
Parameter(s) Offset:
The program data syntax for is defined
as a element followed by an
optional element.
The allowed
elements are: DB|W/W|PCT. The
special forms MINimum, MAXimum and DEFault
are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.