EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 435)

Referencia de instrucciones SCPI
OSA 429
Product-Specific Commands—Description
:CALCulate[1..n][:WDM]:CHANnel:
CENTer[:WAVelength]
Description This command sets the nominal center
wavelength of the selected WDM analysis
channel.
At *RST, this value is not available.
Syntax :CALCulate[1..n][:WDM]:CHANnel:CENTer[:WAV
elength]M]>|MAXimu
m|MINimum|DEFault
Parameter(s) Center:
The program data syntax for
defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> element is M. The
special forms MINimum, MAXimum and DEFault
are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.