EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 424)

Referencia de instrucciones SCPI
418 FTB-5240S/S-P/BP
Product-Specific Commands—Description
:CALCulate[1..n][:WDM]:CHANnel
[:DEFine]
Description This command allocates and initializes a new
WDM analysis channel setup.
*RST has no effect on this command.
Syntax :CALCulate[1..n][:WDM]:CHANnel[:DEFine]
p>,M|HZ]>|MAXimu
m|MINimum
Parameter(s)

Name:
The program data syntax for is defined
as a element.
The parameter corresponds to the
name of the new channel setup to create. The
channel name cannot be empty.
Each channel name must be unique: it is not
possible to define two channels with the same
name.

Define:
The program data syntax for is defined
as a element followed by an
optional element.
The allowed
elements are: M|HZ. The special
forms MINimum and MAXimum are accepted on
input.