EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 388)

Referencia de instrucciones SCPI
382 FTB-5240S/S-P/BP
Product-Specific Commands—Description
:CALCulate[1..n][:WDM]:CHANnel:AUTO:
NOISe:DISTance:FREQuency
Description This command sets the frequency distance from
peak to center of noise region for noise
measurement of the WDM analysis default
channel.
At *RST, default channel noise measurement
distance is set to 100.0 GHz.
Syntax :CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
DISTanceHZ]>|MAXi
mum|MINimum|DEFault
Parameter(s) Distance:
The program data syntax for is
defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> element is HZ. The
special forms MINimum, MAXimum
and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.