EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 431)

Referencia de instrucciones SCPI
OSA 425
Product-Specific Commands—Description
:CALCulate[1..n][:WDM]:CHANnel:
CENTer:FREQuency
Description This command sets the nominal center
frequency of the selected WDM analysis channel.
At *RST, this value is not available.
Syntax :CALCulate[1..n][:WDM]:CHANnel:CENTer:FREQ
uencyHZ]>|MAXimum
|MINimum|DEFault
Parameter(s) Center:
The program data syntax for
defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> element is HZ. The
special forms MINimum, MAXimum and DEFault
are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.