EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 538)

Referencia de instrucciones SCPI
532 FTB-5240S/S-P/BP
Product-Specific Commands—Description
:CALCulate[1..n][:WDM]:THReshold
Description This command sets WDM analysis absolute
power threshold for peak detection.
At *RST, this value is set to -45.0 dBm.
Syntax :CALCulate[1..n][:WDM]:THReshold
reshold[DBM|W]>|MAXimum|MINimu
m|DEFault
Parameter(s) Threshold:
The program data syntax for is
defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> elements are: DBM|W. The
special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.