Sense[1..n]:average:state – EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 User Manual
Page 569

Referencia de instrucciones SCPI
OSA
563
Product-Specific Commands—Description
:SENSe[1..n]:AVERage:STATe?
Description
This query indicates if acquired trace averaging
has been enabled or not.
At *RST, averaging is set to off (disabled).
Syntax
:SENSe[1..n]:AVERage:STATe?
Parameter(s)
None
Response Syntax
Response(s)
State:
The response data syntax for
as a
element.
The
activation state of trace averaging.
0: trace averaging is disabled.
1: trace averaging is enabled.
Example(s)
SENS:AVER:STAT ON
SENS:AVER:STAT? Returns 1 (averaging is
enabled)
See Also
:SENSe[1..n]:AVERage:COUNt
:SENSe[1..n]:AVERage:TYPE
:SENSe[1..n]:AVERage:STATe
This manual is related to the following products: