ADLINK ReadyBoard 910 - Manual (Page 7)

ReadyBoard 910 Reference Manual 1
Chapter 1 About This Manual
Purpose of this Manual
This manual is for designers of systems based on the ReadyBoard 910 Single Board Computer (SBC). The information in
this manual helps designers create embedded systems based on specific design requirements.
Information provided in this reference manual includes:
• ReadyBoard 910 Specifications
• Environmental requirements
• Major integrated circuits (chips) and features implemented
• ReadyBoard 910 connector/pin numbers and definitions
• BIOS Setup information
Information not provided in this reference manual includes:
• Detailed chip specifications
• Internal component operation
• Industry-standard interface pin-out tables
• Internal registers or signal operations
• Bus or signal timing for industry standard busses and signals
References
The following list of references may help you successfully complete your design.
Industry Standard Specifications:
• EPIC Specification Revision 2.0, January 2005
Web site: http://www.pc104.org/specifications.php
• Intel  High Definition Audio (HDA) Specification 1.0a
Web site: http://www.intel.com/content/www/us/en/search.html?keyword=audio+specification
• PCI-104 Specification
Web site: http://www.pc104.org/pci_104_specs.php
• PCI 2.3 Compliant Specifications
For latest revision of the PCI specifications, contact the PCI Special Interest Group Office at:
Web site: http://www.pcisig.com
• PCIe Mini Card Specification, 1.1
Specification: http://read.pudn.com/downloads122/doc/project/518585/PCI_Express_Mini_CEM_11_16Jul04RD.pdf
• USB Specification Version 2.0 and 3.0
Web site: http://www.usb.org/developers
• SATA Specification Version 3.1
Web site: http://www.sata-io.org/
• LPC Specification Version 1.1
Web site: http://www.intel.com/design/chipsets/industry/lpc.htm