ADLINK ReadyBoard 910 - Manual (Page 51)

Chapter 4 BIOS Setup
ReadyBoard 910 Reference Manual 45
 Max CPU Speed XXXX MHz
 Min CPU Speed XXX MHz
 Processor Speed XXXX MHz
 CPU Speed XXXX MHz
 Processor Cores X
 Intel HT Technology Supported
 EMT64 Supported
 Hyper-Threading [Disabled; Enabled]
 Active Processor Cores [All; 1; 2; 3]
• SATA Configuration
 SATA Controller(s) [Enabled; Disabled]
 SATA Mode Selection [IDE; AHCI]
 Serial ATA Port 0 [Empty]
 Serial ATA Port 1 [Empty]
 Serial ATA Port 2 [SSD model]
• USB Configuration
 USB Devices:
• 2 Hubs
 Legacy USB Support [Enabled; Disabled; Auto]
 USB3.0 Support [Enabled; Disabled]
 XHCI Hand-off [Enabled; Disabled]
 EHCI Hand-Off [Disabled; Enabled]
• Super IO Configuration SMSC SCH3114
 Serial Port 0 Configuration
• Serial Port [Disabled; Enabled]
• Device Settings IO=3F8h; IRQ=4
• Serial Port Function [RS232; RS422/RS485]
 Serial Port 1 Configuration
• Serial Port [Disabled; Enabled]
• Device Settings IO=2F8h; IRQ=3
• Serial Port Function [RS232; RS422/RS485]
 Serial Port 2 Configuration
• Serial Port [Disabled; Enabled]
 Serial Port 3 Configuration
• Serial Port [Disabled; Enabled]