Oem logo screen (splash), Logo image requirements – ADLINK ReadyBoard 910 User Manual

Page 48

Text mode
Original mode

Chapter 4

BIOS Setup

Reference Manual

ReadyBoard 910

9. Use the key to select the screen menus listed in the Opening BIOS screen.

OEM Logo Screen (Splash)

The ReadyBoard 910 BIOS supports a graphical logo screen, which can be customized by the user and an
ADLINK Sales Representative and displayed when enabled through the BIOS Setup Utility. The graphical

image can be a company logo or any custom image the user wants to display during the boot process.

Logo Image Requirements

Please contact your ADLINK Sales Representative for more information on OEM Logo Screen
requirements.

NOTE

The serial console port is not hardware protected. Diagnostic software that
probes hardware addresses may cause a loss or failure of the serial console
functions.

NOTE

The Quiet Boot feature must be set to Enabled in the Boot settings of BIOS
Setup for the system to recognize the OEM Logo Screen.