ADLINK ReadyBoard 910 - Manual (Page 11)

Chapter 2 Product Overview
ReadyBoard 910 Reference Manual 5
Board Features
• CPU
 Supports Intel 35W Celeron and 35W and 45W 2nd and 3rd Generation Core i processors
 Provides DMI (Direct Media Interface) with 2GB/s of maximum theoretical bandwidth in each
direction
 Provides FDI (Flexible Display Interface) for carrying display traffic to the PCH
 Supports internal 256KB L2 cache for each execution core
 Supports up to 8MB L3 cache shared among all cores
 Supports Enhanced Intel SpeedStep® Technology (EIST)
 Supports rPGA988B socket package
• Memory
 Provides dual standard 204-pin DDR3 SODIMM sockets
 Supports +1.5V DDR3, 1067/1333 MHz SDRAM up to 16GB total
 Supports unregistered/unbuffered, non-ECC SDRAM
• PCI-104 Bus Interface
 Supports PCI 2.3 standard
 Supports 33 MHz PCI Bus speed
 Supports up to four PCI devices
 Provides 120-pin, 16.5mm height connector
• Serial ATA Interface (SATA)
 Provides two standard 7-pin SATA 3.0 connectors
 Supports up to 6Gb/second data transfer rate
 Support independent DMA operation
 Supports Native Command Queuing
 Provides Auto Activate for DMA
 Supports Hot Plug features
• USB Ports
 Provide two root USB 2.0 hubs
 Provide two USB 2.0 ports through a 10-pin header
 Provide dual standard USB 3.0 stacked connector through the PCIe x1 Port1
 Support USB bootable devices
 Support USB 2.0 and legacy USB v1.1
 Support USB 3.0 for SuperSpeed, High-Speed, and Full-Speed signals
 Provide over-current fuses on board
• Serial Ports
 Provide two buffered serial ports with full handshaking
 Provide one 10-pin header for one serial port
 Provide one 9-pin standard DB9 connector for one serial port
 Provide 16550-equivalent controllers, each with a built-in 16-byte FIFO buffer