ADLINK ReadyBoard 910 - Manual (Page 12)

Chapter 2 Product Overview
6 Reference Manual ReadyBoard 910
 Support RS232 capability on both ports
 Support full modem capability on both ports
 Support RS485 or RS422 operation on both ports
 Support programmable word length, stop bits, and parity
 Support 16-bit programmable baud-rate generator and an interrupt generator
• Keyboard/Mouse Interface
 Provides PS/2 keyboard interface (shared with mouse)
 Provides PS/2 mouse interface (shared with keyboard)
 Provides shared over-current fuse
 Provides four dedicated open-drain outputs
• Audio Interface (HDA)
 Provides detection for up to four jacks
 Supports stereo low voltage (1.5V~3.3V) I/O
 Supports stereo digital microphone input
 Provides S/PDIF digital audio interface
• Ethernet Interface
 Includes two fully independent RJ45 Gigabit Ethernet ports
 Integrated LEDs on each port (Link/Activity and Speed)
 Provides two Intel 8257IT controller chips
 Supports IEEE 802.3 10BaseT/100BaseTX and 10/100/1000BaseT compatible physical layer
 Supports Auto-negotiation for speed, duplex mode, and flow control
 Supports full duplex or half-duplex mode
• Full-duplex mode supports transmit and receive frames simultaneously
• Supports IEEE 802.3x Flow control in full duplex mode
• Half-duplex mode supports enhanced proprietary collision reduction mode
• Video Interfaces (VGA/DVI/LVDS)
 Support an integrated graphics controller
 Support analog a VGA DAC interface
 Support VGA resolutions up to 2048x1536 with 32-bit color at 75Hz
 Support DVI outputs (allow capacity to bring out TMDS signals to a DVI connector)
 Support DVI resolutions up to 1920x1200 at 60Hz
 Support LVDS 24bpp outputs (1 or 2 channel, four differential signals: 3-bits + clock)
 Support LVDS resolutions up to 1920x1080 at 60Hz
• Miscellaneous
 Provides real-time clock (RTC) with replaceable battery
 Supports battery-free boot
 Provides external battery connection for RTC operation
 Provides user GPIO interface header
 Provides thermal and voltage monitoring