YSI ADV6600 - Manual (Page 30)

Section 3. Installation and Setup
ADV6600
Y S I
Environmental
Page 20
appears and then typing Y. To return to the Main menu of the sonde menu, type Menu after the “#”
and press Enter. The command line function may be useful during troubleshooting discussions
with YSI Technical Support personnel.
To save power, the Water Quality hardware will power down automatically if no interaction from
the keyboard occurs for approximately 60 seconds. When the firmware is in this “sleep” mode, the
first subsequent keystroke simply “wakes it up” and has no visible effect on the display. The next
keystroke after the unit is “awakened” will be input to the firmware in the intended manner. Thus,
if you press a key after the sonde has been inactive for some time and receive no response, press the
key again.
3-6.2. Water Quality Menu Flowchart
Several menu functions available on previous YSI sondes are no longer available on the ADV6600.
Due to the master-slave relationship between the ADV and the Water Quality hardware packages,
accessibility to these functions was removed, preventing interruption of communications between
the firmware of each component.
1. Conductivity
2. Dissolved Oxy
3. ISE1 pH
▼ MORE ▼
1. ( ’ ’ ’ ’ ) Date
2. ( ’ ’ ’ ’ ) Time hh : mm : ss
3. ( ’ ’ ’ ’ ) Temp C
▼ MORE ▼
1. ( ’ ’ ’ ’ ) Time
2. ( ’ ’ ’ ’ ) Temperature
3. ( ’ ’ ’ ’ ) Conductivity
▼ MORE ▼
1. Cal constants
2. Setup
3. Sensor
1. Calibrate
ADV6600
2. Report
3. Sensor
4. Advanced
SONDE MENU