YSI ADV6600 - Manual (Page 167)

ADV6600
Y S I Environmental
Page 157
Appendix B. Specifications
Sensor Range Resolution Accuracy
Velocity
±0.001 to 6 m/s
(±0.003 to 19 ft/s) 0.01 m/s
± 1% of measured velocity,
± 0.001 m/s
Non-Vented
Pressure 10m, 30m, 50m
0.025% Full
Scale
± 0.25 % Full Scale
Temperature -5 to 45
°C 0.01 °C
± 0.15
°C
Dissolved Oxygen,
% Saturation
0 to 500 % air
saturation
0.1 % air
saturation
0-200 % air saturation, ± 2 % of
the reading or 2 % air saturation,
whichever is greater
200-500 % air saturation, ± 6 % of
reading
Dissolved Oxygen,
mg/L 0 to 50 mg/L 0.01 mg/L 0 to 20 mg/L, ± 2 % of the reading
or 0.2 mg/L, whichever is greater
20 to 50 mg/L, ± 6 % of the
reading
Conductivity * 0 to 100 mS/cm
0.001 mS/cm to
0.1 mS/cm (range
dependent) ± 0.5% of reading + 0.001 mS/cm
Salinity
0 to 70 ppt
0.01 ppt
± 1% of reading or 0.1 ppt,
whichever is greater
pH 0 to 14 units 0.01 units ± 0.2 units
ORP -999 to +999 mV 0.1 mV ± 20 mV
Turbidity
0 to 1000 NTU
0.1 NTU
± 5% reading or 2 NTU
(whichever is greater), relative to
calibration standards
Chlorophyll
0 to 400 µg/L Chl;
0-100 % Full
Scale 0.1 µg/L Chl;
0.1 % FS No specification provided
* Report outputs of specific conductance (conductivity corrected to 25 C), resistivity, and total dissolved solids
are also provided. These values are automatically calculated from conductivity according to algorithms found
in Standard Methods for the Examination of Water and Wastewater (Ed 1989).