Toa D-2000 Series Installation - Manual (Page 79)

79
11.16. D-972AE Digital Output Module
Output 4 channels, 5.0 V (p-p), 110 Ω, XLR-3-32 type
Applicable Format AES/EBU (2 channel multiplexed)
Sampling Frequency 48 kHz
Finish Panel: Pre-coated steel plate, black (30 % gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm (1.38" x 4.7" x 7.02")
Weight 130 g (0.29 lb)
• Accessories
Ferrite clamp ............................................................................. 2
* 0 dB = 0.775 V
Note: The design and specifications are subject to change without notice for improvement.
Output 4 channels, +4 dB*/–10 dB* (Selectable with the DIP switch),
adaptable load of over 600 Ω,
electronically-balanced/unbalanced (Selectable with the DIP switch),
XLR-3-32 type
D/A Converter 24 bits
Sampling Frequency 48 kHz
Frequency Response 20 Hz – 20 kHz, ±1 dB
Dynamic Range Over 104 dB (IHF-A weighted)
Total Harmonic Distortion Under 0.008 %
Finish Panel: Pre-coated steel plate, black (30 % gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm (1.38" x 4.7" x 7.02")
Weight 200 g (0.44 lb)
11.15. D-2000DA1 Line Output Module
* 0 dB = 0.775 V
Note: The design and specifications are subject to change without notice for improvement.
11.17. D-961SP Digital Output Module
Output Stereo 2 channels (with splitter, each pair of optical output and coaxial output
in parallel),
0.5 V (p-p), 75 Ω, Coaxial RCA jack x 2
Square optical connector x 2
Applicable Format S/PDIF (2 channel multiplexed)
Sampling Frequency 48 kHz
Finish Panel: Pre-coated steel plate, black (30 % gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm (1.38" x 4.7" x 7.02")
Weight 130 g (0.29 lb)
Note: The design and specifications are subject to change without notice for improvement.