Toa D-2000 Series Installation - Manual (Page 54)

54
Lights
Lights
CONSOLE
D-2008SP front
D-2012C
Line L: 1
Monitor number
indicated channels
Line R: 2
Headphone output L:
Headphone output R: 3
4
Monitor number
Step 3. Connect headphones to the headphone jack, then adjust the sound volume with the headphone
volume control knob.
8.1.3. Selecting the D-2012C's monitor channels
The line input and headphone output of the D-2012C Remote Console connected to the D-2008SP
processor's Monitor bus terminal can be monitored.
Note
Before selecting, connect the D-2008SP's Monitor bus terminal to the D-2012C's Monitor bus terminal and
perform console settings using the D-2000 Setting Software.
Step 1. Press the Selection key " " or " " several times to light
“CONSOLE” (Item selection indicator).
Step 2. Press the Selection key " " or " " to select monitor
number (1 – 4).
The monitor selection indicator of the selected number
lights.
Monitor numbers 1 and 2 respectively correspond to the
D-2012C's Line inputs L and R, while monitor numbers 3
and 4 correspond to the D-2012C's Headphone outputs
L and R.