Toa D-2000 Series Installation - Manual (Page 11)

11
• A-Section
1
2
3
4
• B-Section
6
5
1. Power switch
Power is switched on and off with each
depression of this switch.
2. Power indicator
Lights when the power is switched on.
3. LAN connection indicator
Displays the connection status of the D-2008SP
to be controlled.
Lit:
When all the D-2008SP units to be
controlled are in controllable state.
Flashing: When both controllable and
uncontrollable D-2000SP units exist in
a system where multiple D-2008SP
units to be controlled are used.
Unlit: When all the D-2008SP units to be
controlled are in uncontrollable state.
If there exists any uncontrollable D-2008SP,
check the D-2008SP's power supply and
connections.
4. Key lock indicator
Lights red when the operation keys or knobs are
locked.
5. Write-in space
Write the name of the function assigned to the
key, etc. in these spaces.
6. Function keys (1 – 8)
Execute contact control, preset memory recall or
other functions assigned to the keys.
Use the D-2000 Setting Software to set functions
and assign them to the keys.