Toa D-2000 Series Installation - Manual (Page 72)

72
[Recommended PC requirements]
Hardware Requirements
CPU 2 GHz, Intel Pentium 4 or higher
Memory Over 1.5 GB (2 GB or more recommended)
Display 1024 x 768 resolution or higher
Free Hard Disk Space Over 16 MB (for D-2000 Setting Software installation)
or over 500 MB (when ".NET Framework" needs to be installed)
CD/DVD Drive CD-ROM drive
LAN Card Compatible to 10BASE-T or faster connection
Software Requirements
OS Windows XP Service Pack 2 or later, 32/64-bit Windows Vista,
32/64-bit Windows 7
Following are the verified operating systems:
Windows XP Service Pack 2 (Home Edition, Professional)
32-bit Windows Vista Service Pack 2 (Ultimate, Business)
64-bit Windows Vista Service Pack 2 (Business)
32-bit Windows 7 (Ultimate, Professional)
64-bit Windows 7 (Professional)
Required Component .NET Framework 3.5 SP1
Notes
• The design and specifications are subject to change without notice for improvement.
• Pentium is a trademark of Intel Corporation.
• Windows and Windows Vista are trademarks of Microsoft Corporation.
• Regarding other company names and products, they are also trademarks of individual companies.
• Accessories
Power cord (2 m or 6.56 ft) ....................................................... 1
Rack mounting screw 5 x 12 (with plane washer)* ................... 4
Blank Panel (preinstalled on the module slot) .......................... 8
Module mounting screw (spare) ............................................... 4
CD (Setting Software, Setting Software Instructions, etc.) ....... 1
* Not supplied with the D-2008SP CU.
LAN Network I/F: 1 10BASE-T/100BASE-TX circuit (selectable
by automatic recognition), RJ45 connector for
maintenance use, connection via a switching
hub
Network Protocol: TCP/IP
Connection Cable: Category 5 or higher shielded twisted pair
cable for LAN (CAT5-STP or better)
Maximum Cable Distance: 100 m or 109.36 yd (between this unit and a
switching hub or PC)
Control RS-232C: D-sub connector (9 pins), for external control
Module:
Remote control module slot x 2
Operating Temperature 5 to 40 °C (41 to 104 ºF)
Finish Panel: Aluminum, hair-line finish, black
Case: Pre-coated steel plate
Dimensions 482 (w) x 132.6 (h) x 343.4 (d) mm (18.98" x 5.22" x 13.52")
Weight 6.3 kg (13.89 lb)