Toa D-2000 Series Installation User Manual

Page 76

Input

2 channels, –50/–36/–10/+4 dB* (Selectable with the DIP switch), 4.7 kΩ,
electronically-balanced, 3-pin removable terminal block
Phantom power supply (+15 V, can be set with the DIP switch)
Ground lift switch (can be set with the DIP switch)

A/D Converter

20 bits

Sampling Frequency

48 kHz

Frequency Response

20 Hz – 20 kHz, ±1 dB (+4 dB* input)

Dynamic Range

Over 85 dB (IHF-A weighted) (+4 dB* input)

Total Harmonic Distortion

Under 0.2 % (+4 dB* input)

Finish

Panel: Pre-coated steel plate, black (30 % gloss)

Dimensions

35 (w) x 119.5 (h) x 178.4 (d) mm (1.38" x 4.7" x 7.02")

Weight

125 g (0.28 lb)

11.7. D-922E Microphone/Line Input Module

• Accessories
3-pin removable terminal plug (preinstalled on the unit) ........... 2

* 0 dB = 0.775 V

Note: The design and specifications are subject to change without notice for improvement.

11.8. D-2000AD1 Microphone/Line Input Module

* 0 dB = 0.775 V

Note: The design and specifications are subject to change without notice for improvement.

Input

4 channels, Mic/Line selectable (Selectable with the D-2000 Setting Software)

Mic:

–50/–36 dB*, 2.6 kΩ, electronically-balanced

Line: –10 dB*, 2.6 kΩ/+4 dB*, 7 kΩ, electronically-balanced

Connector: XLR-3-31 type
Phantom power supply (48 V DC, can be set for the Mic, 5 mA or less per
channel)
Ground lift switch