Toa D-2000 Series Installation - Manual (Page 6)

6
2. NOMENCLATURE AND FUNCTIONS
2.1. D-2008SP Digital Mixing Processor Unit
The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total.
A built-in multiple signal processing functions permit the unit to be used as both a mixer and a signal
processor.
Its audio input/output and control ports can accept plug-in modules, making the unit have a maximum of 32
inputs or 32 outputs and up to 2 control modules.
Using the following optional modules enables the unit to perform their functions: Two D-983s Remote Control
Module for providing a maximum of 48 contact inputs and 32 contact outputs, D-984VC VCA Control Module
for VCA control, and D-2000CB CobraNet Interface Module for audio data transfer between CobraNet
devices.
Each function can be set using the D-2000 Setting Software.
Operation can be performed through the front key operation and from a PC with the D-2000 Setting Software
installed.
The D-2012C Remote Console Unit, when connected, remotely controls the D-2008SP's basic operations
such as volume control.
It can be mounted in an EIA component rack (3U size*).
* 1U size = 44.5 mm or 1.75" (standard size)
Note
CobraNet is a trademark of Cirrus Logic, Inc.
1 2
3
4
7
10 11 12 13
19
20
21
22
23
24
14 15
16
17
18
5
25
8
6
26
9
[Front]