Toa D-2000 Series Installation - Manual (Page 19)

19
2.4.4. D-922E Microphone/Line Input Module
7. Monaural input terminal [1, 2]
Electronically-balanced, removable terminal block.
(H: Hot, C: Cold, E: Ground)
Note
Be sure to use the supplied removable terminal plugs (3P) for
connection.
8. Input sensitivity switch [PHANTOM, GND LIFT, MIC/LINE]
4-pole switch. Enables phantom power (+15V; ON/OFF, enabled only
when set to the MIC position), ground lift and input sensitivity.
Input sensitivity: –36 or –50 dB (MIC mode) / –10 or +4 dB (LINE mode)
Note
To use as monitor input, set the "PHANTOM" switch to OFF and "Input
sensitivity" switch to "+4 dB (LINE)."
E
C
H
E
C
H
1
MIC/LINE INPUT MODULE
model D-922E
OFF : PHANTOM
LIFT : GND
LINE
-36dB(MIC)
+4dB(LINE)
ON
NORMAL
MIC
-10dB(LINE)
-50dB(MIC)
OFF : PHANTOM
LIFT : GND
LINE
-36dB(MIC)
+4dB(LINE)
ON
NORMAL
MIC
-10dB(LINE)
-50dB(MIC)
2
7
8
OFF : PHANTOM
LIFT : GND
LINE
-36dB(MIC)
+4dB(LINE)
ON
NORMAL
MIC
-10dB(LINE)
-50dB(MIC)
2.4.3. D-922F Microphone/Line Input Module
5. Monaural input terminal [1, 2] (XLR-3-31 equivalent)
Electronically-balanced input terminal.
(Pin 1: Ground, Pin 2: Hot, Pin 3: Cold)
Use XLR-3-12C or equivalent for connection.
6. Input sensitivity switch [PHANTOM, GND LIFT, MIC/LINE]
4-pole switch. Enables phantom power (+15 V; ON/OFF, enabled only
when set to the MIC position), ground lift and input sensitivity.
Input sensitivity: –36 or –50 dB (MIC mode) / –10 or +4 dB (LINE mode)
Note
To use as monitor input, set the "PHANTOM" switch to OFF and "Input
sensitivity" switch to "+4 dB (LINE)."
2
1
MIC/LINE INPUT MODULE
model D-922F
OFF : PHANTOM
LIFT : GND
LINE
-36dB(MIC)
+4dB(LINE)
ON
NORMAL
MIC
-10dB(LINE)
-50dB(MIC)
OFF : PHANTOM
LIFT : GND
LINE
-36dB(MIC)
+4dB(LINE)
ON
NORMAL
MIC
-10dB(LINE)
-50dB(MIC)
5
6
OFF : PHANTOM
LIFT : GND
LINE
-36dB(MIC)
+4dB(LINE)
ON
NORMAL
MIC
-10dB(LINE)
-50dB(MIC)
2: Hot
1: Ground
3: Cold