TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 82)

5-18 Chapter 5 - RMS Mapper
Exiting Real-Time Operation
RMS Mapper for the Legacy 6000
Software Version 2.00
Exiting Real-Time Operation
To exit real-time operation, press the Exit button, located on the bottom left corner of the
current page. If data is being stored to the PC card, the exiting process may take a minute
or so to properly store this data.
RMS-Map Manager
Some Legacy 6000 system kits include RMS Office for an office computer or laptop. RMS Map
Manager Tools can be used to view application “as-applied” maps. (Figure 5-13) shows “as-
applied” data and roads data in the Map Manager view. To view “as-applied” maps, copy the
record files (RCD) from the PC card to a desktop or laptop computer. Consult the Map Manager
user’s guide for instructions on how to generate application reports from the data.
Figure 5-12: Exiting Real-time Application
Exit
soft-key