Device manager – TeeJet Legacy 6000 RMS_EXT User Guide User Manual
Page 26

2-14
Chapter 2 - Getting Started
System Tools
RMS-EXT for the Legacy 6000
Software Version 2.00
Device Manager
This tool allows the viewing of all components connected to the Mid-Tech Legacy 6000 system. In
RMS-EXT, the GPS Receiver, Rate Controller, and Console, are available for diagnostics.
To access the Device Manager diagnostic page from the Main Launcher page, select System
Tools (Figure 2-13) / Device Manager (Figure 2-14). Scroll through all of the connected devices to
review the current status of these devices.
Console
When selecting Console as the device for diagnostics, a Console Information page is displayed,
Tool
Description
Device Manager
This tool allows the viewing of all components on the Legacy system,
including the Mid-Tech CAN Bus, external rate controller, and GPS receiver.
Card Manager
This application runs in conjunction with the PC card. The card must be
inserted to run this application. Card manager allows basic file manipula-
tion.
Table 2-5: System Tools
Figure 2-14: Device Manager Page
Information Soft-Key
- Sentry 6140 (16 pages)
- 801 flowmeter (2 pages)
- GPS Speed Sensor (2 pages)
- IC18 SPREADER JOB COMPUTER (47 pages)
- IC18 SPREADER JOB COMPUTER (32 pages)
- IC18 SPRAYER JOB COMPUTER (43 pages)
- IC18 SPRAYER JOB COMPUTER (68 pages)
- IC18 NH3 JOB COMPUTER (63 pages)
- BOOMPILOT JOB COMPUTER (21 pages)
- BOOMPILOT JOB COMPUTER (32 pages)
- MATRIX 570VT Software version 1.00 (12 pages)
- MATRIX 570VT Software version 1.00 (20 pages)
- MT 600 Piston Injection Pump (6 pages)
- BoomPilot (2 pages)
- BoomPilot Pro Metric (2 pages)
- BoomPilot Pro (2 pages)
- 500 SLURRY COMPUTER (30 pages)
- 70 Series Speed Area Monitor (2 pages)
- 70 Series EPC - Manual Pump (4 pages)
- 70 Series Fill Flow (2 pages)
- 70 Series Flow Volume Monitor (2 pages)
- ARC-6000 (50 pages)
- TASC-6000 (78 pages)
- TASC-6100 (86 pages)
- TASC-6200 (50 pages)
- TASC-6200 (45 pages)
- TASC DATA LOGGER (17 pages)
- TASC PRINTER MODULE (8 pages)
- TASC-6000 Supplement (9 pages)
- 744A Sprayer Control (14 pages)
- 744E AUTO BOOM SECTION CONTROL (8 pages)
- 744E SPRAYER CONTROL (16 pages)
- 814-AB Airblast Sprayer Monitor (15 pages)
- 834 Sprayer Control (15 pages)
- 834 Sprayer Control L2.12 (15 pages)
- 834-P Sprayer Control (18 pages)
- 844 Sprayer Control (44 pages)
- 844 Operations Mini (2 pages)
- 844-AB Sprayer Control (24 pages)
- 844-E Sprayer Control (36 pages)
- 844-R Speed Compensated Application Control (32 pages)
- 854 Sprayer Control (52 pages)
- 026 – 73 AddFlow (8 pages)
- LH 3000 (24 pages)
- LH 4000 (44 pages)