TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 72)

5-8 Chapter 5 - RMS Mapper
Mapper Launcher
RMS Mapper for the Legacy 6000
Software Version 2.00
Mapper Setup
All file names, associated with the current mapping session, are assigned in Mapper setup. You
cannot collect data without a Map File name. Table 5-2 describes each parameter in more detail.
Figure 5-5: The Mapper Setup Page
Parameter Description
Map File Mapping data is stored in this file. Mid-Tech file type (GMF).
Background File A previously mapped GMF file that can be viewed in the background.
Base Map File A Geo-tif file, typically a USGS Quadrangle. This file must be in WGS-
84 Latitude and Longitude coordinate system.
Collection Interval Sets the rate of data collected; typically 1 second. Choices are 1, 2, 3,
4, and 5 seconds.
Table 5-2: Mapper Setup Description