TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 70)

5-6 Chapter 5 - RMS Mapper
Setting up a Job
RMS Mapper for the Legacy 6000
Software Version 2.00
Creating a Job Based on Another Job
You can create a new job based on the settings of an existing job. Select the job to be copied in
the main job page window, and press the “Create a Job Based on Another Job” button on the Job
page. A prompt appears asking you to manually enter a new job name or accept the auto-named
job.
Creating a New Job
To create a new job, press the Create a new Job button in the Job page. This brings up the Create
a New Job page. There are two methods of creating a new job: manually and automatically.
Manually Naming a Job
To manually name a job, highlight the text entry window (Figure 5-3) and use the arrow keys to
enter a name for the job. A job name can contain alpha/numeric characters. When you have
entered the desired job name, press the forward button to save the name and return to the Job
page.
Automatically Naming a Job
To automatically name a new job based on the current days date, press the Auto-name button in
the Create a Job page (Figure 5-3). The job is assigned a name based on the current date, fol-
lowed by the number that job is for the day. Therefore, the first job on November 21st 2002 is auto-
matically named 11212002-1. The second job for the same day is named 11212002-2.
Figure 5-3: Manually Enter a Job Name
Auto-name
Soft-Key