TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 55)

RMS-EXT for the Legacy 6000
Software Version 2.00
Chapter 4 - Real-time Operation 4-13
Product Application
Warning Message
A warning message does not obstruct real-time operation. When a warning message first appears
in the banner bar, the banner bar color changes to Red and the alarm sounds. To mute the alarm,
press the arrow soft-key, in the bottom right corner of the screen, and press the Mute Alarm soft-
key. The warning message remains in the banner bar until the situation causing the warning is
resolved. The alarm does not sound again until a new warning appears.Typical warning messages
relate to GPS Positions, product application rates, and speeds.
Figure 4-12: Warning Message
Message Area