TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 36)

3-4 Chapter 3 - Real-time Setup
Setting up a Job
RMS-EXT for the Legacy 6000
Software Version 2.00
Setting up a Job
Pressing the Bull’s-eye button in the RMS-EXT Main Launcher brings up the Job page (Figure 3-
2). You must have a PC card installed to create a job and store application and trajectory data.
Each Job, created with a unique job id, has an associated file folder, named after the job id and
placed at the root of the inserted PC card. All data files associated with a job are stored in this
folder on the PC card.
There are three methods for entering/selecting a job: select an existing Job, create a job based on
an existing job, and create a new job.
Selecting an Existing Job
You can select an existing job from the Job page (Figure 3-2) by using the Up and Down arrow
keys. An existing Job has an associated file folder located on the PC card. The name of the job
folder is the same as the job number.
Creating a Job Based on Another Job
You can create a new job based on the settings of an existing job. Select the job to be copied in
the main job page window and press the “Create a Job Based on Another Job” button on the Job
page. A prompt appears asking you to manually enter a new job name or accept the auto-named
job.
Figure 3-2: The Job Page
Create a new Job Create a Job
based on another-
Job.