TeeJet RMS Office - Manual (Page 46)

2-28 Chapter 2 - RMS Profiles
The Spray Configuration Profile
RMS Office
Software Version 3.10
The Spray Configuration Profile
The Spray Configuration Profile allows the creation of different spray boom configura-
tions for the fleet. When the actual spray application session is started, select the
specific spray boom configuration for your vehicle.
To access the Spray Configuration Profile page, select the Spray Configuration Pro-
file, located in the RMS Launcher Profiles page. The first page is a list of profiles currently entered
into the Spray Configuration database (see Figure 2-25). If you have not entered any profiles yet,
this page is empty. To enter a new profile, press the New button. To edit an existing profile select
the desired profile, and press Enter or double click on the profile name using the mouse. To delete
an existing profile, highlight the desired profile name and press the Delete Button.
When finished entering a new profile, press the OK button to save and add this new profile into the
Spray Configuration list. If you decide not to add the profile to the profile database, simply press
the Cancel button to return to the Spray Configuration Profile list.
To Exit the Spray Configuration Profile, press the Exit Button. This returns the program to the RMS
Launcher Profiles page.
Create all profiles in RMS-Office and transfer it, via the PC card, to the Legacy 6000 con-
sole running RMS-EXT software. Transfer profiles using the RMS-Office Export program
(see Chapter 3 - RMS Tools).
Figure 2-25: The Spray Configuration Profile Page