TeeJet RMS Office - Manual (Page 16)

1-8 Chapter 1 - RMS Office Introduction
RMS Office System Menu Page
RMS Office
Software Version 3.10
System Setup-Main
You must run System Setup (Figure 1-5) the first time Mid-Tech RMS Office software is started. It
should be necessary to run System Setup once unless changes are made to the system units.
Switching from English units to Metric is an example of when you would run System Setup again.
Unit of Measure Menu Field
This menu item allows the selection of the measurement unit that the mapping software displays.
There are two choices: ENGLISH and METRIC. Selecting ENGLISH units displays all distances in
feet and miles, areas in square feet and acres, vehicle speed in miles per hour, liquid volume in
ounces and gallons, and weight in Pounds. Selecting METRIC units displays distances in meters
and kilometers, areas in square meters and hectares, vehicle speed in Kilometers per hour, liquid
volume in liters, and weight in Kilograms (see Table 1-2).
Figure 1-5: The System Setup Page