Reznor SCE Unit Installation Manual - Manual (Page 3)

Form RZ-NA I-SCE, Mfg #207697 Rev 7, Page 3
FIGURE 1 - Model SCE Dimensions - inches ±1/8 (mm ±3)
3. Dimensions
4. Uncrating The furnace is shipped completely assembled. Immediately upon uncrating, check the gas speci-
fications and electrical characteristics of the unit to be sure that they agree with the gas and
electric supply at the installation site.
Check the unit for any damage that may have been incurred during shipment. If damage is found,
document the damage with the transporting agency and immediately contact your Reznor dis-
tributor. If you are an authorized Distributor, follow the FOB freight policy procedures.
The bottom corners are fastened to the crate with angle clips. Remove the lag screws from the
shipping clips. Remove the clips and return the bolts to the heater legs to support the corner leg
and the heater bottom. Putting the bolts back in the heater is required.
Standard
Model
SCE
Model SCE
with Optional
Horizontal
Inlet with
Duct Flanges
Size A B D E F G H J K L
Dimensions (inches±1/8)
125 32-1/4 25-1/4 15-1/4 8-1/8 16-1/4 7 17-3/4 17-3/8 17 1/2 40-1/4 27-3/4
150, 175 32-1/4 30-3/4 20-3/4 8-1/8 21-3/4 7 23-1/4 22-7/8 18-3/8 1/2 39 27-3/4
200, 225 35-1/4 36-1/4 26-1/4 10-3/4 27-1/4 10 28-3/4 28-3/8 17 1/2 40-1/4 30-3/4
250 35-1/4 43-1/2 33-1/2 9-3/4 34-1/2 9 36 35-5/8 16 1/2 39-1/4 30-3/4
300 35-1/4 44-1/2 4-1/5 10-3/4 35-1/2 10 37 38-5/8 17 3/4 40-1/4 30-3/4
350 35-1/4 50 40 10-3/4 41 10 42-1/2 42-1/8 18-3/8 3/4 39 30-3/4
400 35-1/4 55-1/2 45-1/2 10-3/4 46-1/2 10 48 47-5/8 17 3/4 40-1/4 30-3/4
Dimensions (mm±3)
125 819 641 387 206 413 178 451 441 432 13 1022 705
150, 175 819 781 527 206 552 178 591 581 467 13 991 705
200, 225 895 921 667 273 692 254 730 721 432 13 1022 781
250 895 1105 851 248 876 229 914 905 406 13 997 781
300 895 1130 876 273 902 254 940 930 432 19 1022 781
350 895 1270 1016 273 1041 254 1080 1070 467 19 991 781
400 895 1410 1156 273 1181 254 1219 1210 432 19 1022 781
N M