Interlogix NVR 21 (S/P) User Manual - Manual (Page 93)

Chapter 10: Recording
TruVision NVR 21(S/P) User Manual 87
5. Select the day of the week for which you want to set up the schedule.
You can define a schedule for each day of the week.
6. Set the start and end time for recording.
Define a time period by entering a start (left column) and end (right column) time.
You can schedule up to eight time periods. Check
All Day to record all day.
Note : Time periods defined cannot overlap.
7. Select a recording type.
This setting instructs the recorder to begin recording when an alarm is triggered.
The recording type can be based on time and triggered by motion detection and/or
an alarm. If set to TimeLapse (TL-Hi or TL-Lo), the recorder records continuously.
8. Click Apply to save settings
9. Repeat steps 5 to 8 for other days of the week or to copy the schedule settings to
another day.
To copy the current schedule settings to another day of the week, click Copy . Select
the day of the week to which to copy the schedule and click OK to save changes
and return to the Edit screen.
10. Repeat steps 2 to 9 for other cameras.
11. Click Apply to save the settings and then OK to return to the schedule screen.
Holiday schedules
As well as being able to schedule when recordings occur during the week, you can also
schedule them for specific holidays in the year such as the first of January, or the
second Wednesday of every month. You can schedule up to 32 holiday periods.
A holiday period can be scheduled for a particular day or as a block of days.
To set up a holiday recording schedule:
1. From the menu toolbar, click Display Mode Settin gs > Holiday .