Interlogix NVR 21 (S/P) User Manual - Manual (Page 155)

Appendix D: KTD-405 keypad
TruVision NVR 21(S/P) User Manual 149
5. To connect it to the recorder, press the zone button and enter the ID number of the
recorder. The default value is “1”.
6. To configure the recorder zone ID number, at the recorder enter the Monitor screen
by selecting Display Mode Settings in the main menu and select Monitor . Under
Zone ID, enter the zone ID value. The default value is “1”.
Note: The zone ID value must be identical for the recorder and keypad.
The recorder is now connected to the KTD-405 keypad.
TVN 21(P) and keypad functions
The KTD-405U acts as a recorder control keypad when connected to the recorder. The
keypad mimics many of the functions available from the front panel of the recorder.
Unavailable TVN 21 functions
The following recorder functions are unavailable when using the keypad to control the
recorder:
 Export video
 Shadow tour
 Select motion detection or tampering zones
 Archive records
 Capture video
If these functions are required, it is recommended to use a mouse in conjunction with
the keypad as all recorder functions will then be available.
Unavailable keypad functions
The following keypad buttons are unavailable when using the keypad to control the
recorder: